http://en.wikipedia.org/wiki/SIP_Requests
http://tools.ietf.org/html/rfc3261
Simple Example:
atlanta.com . . . biloxi.com
. proxy proxy .
. .
Alice's . . . . . . . . . . . . . . . . . . . . Bob's
softphone SIP Phone
| | | |
| INVITE F1 | | |
|--------------->| INVITE F2 | |
| 100 Trying F3 |--------------->| INVITE F4 |
|<---------------| 100 Trying F5 |--------------->|
| |<-------------- | 180 Ringing F6 |
| | 180 Ringing F7 |<---------------|
| 180 Ringing F8 |<---------------| 200 OK F9 |
|<---------------| 200 OK F10 |<---------------|
| 200 OK F11 |<---------------| |
|<---------------| | |
| ACK F12 |
|------------------------------------------------->|
| Media Session |
|<================================================>|
| BYE F13 |
|<-------------------------------------------------|
| 200 OK F14 |
|------------------------------------------------->|
| |
Figure 1: SIP session setup example with SIP trapezoid
INVITE sip:bob@biloxi.com SIP/2.0
Via: SIP/2.0/UDP pc33.atlanta.com;branch=z9hG4bK776asdhds
Max-Forwards: 70
To: Bob <sip:bob@biloxi.com>
From: Alice <sip:alice@atlanta.com>;tag=1928301774
Call-ID: a84b4c76e66710@pc33.atlanta.com
CSeq: 314159 INVITE
Contact: <sip:alice@pc33.atlanta.com>
Content-Type: application/sdp
Content-Length: 142
(Alice's SDP not shown)
7 SIP Messages
SIP is a text-based protocol and uses the UTF-8 charset (RFC 2279
[7]).
A SIP message is either a request from a client to a server, or a
response from a server to a client.
Both Request (section 7.1) and Response (section 7.2) messages use
the basic format of RFC 2822 [3], even though the syntax differs in
character set and syntax specifics. (SIP allows header fields that
would not be valid RFC 2822 header fields, for example.) Both types
of messages consist of a start-line, one or more header fields, an
empty line indicating the end of the header fields, and an optional
message-body.
generic-message = start-line
*message-header
CRLF
[ message-body ]
start-line = Request-Line / Status-Line
The start-line, each message-header line, and the empty line MUST be
terminated by a carriage-return line-feed sequence (CRLF). Note that
the empty line MUST be present even if the message-body is not.
Except for the above difference in character sets, much of SIP's
message and header field syntax is identical to HTTP/1.1. Rather
than repeating the syntax and semantics here, we use [HX.Y] to refer
to Section X.Y of the current HTTP/1.1 specification (RFC 2616 [8]).
However, SIP is not an extension of HTTP.7.1 Requests
SIP requests are distinguished by having a Request-Line for a start-
line. A Request-Line contains a method name, a Request-URI, and the
protocol version separated by a single space (SP) character.
The Request-Line ends with CRLF. No CR or LF are allowed except in
the end-of-line CRLF sequence. No linear whitespace (LWS) is allowed
in any of the elements.
Request-Line = Method SP Request-URI SP SIP-Version CRLF
Method: This specification defines six methods: REGISTER for
registering contact information, INVITE, ACK, and CANCEL for
setting up sessions, BYE for terminating sessions, and
OPTIONS for querying servers about their capabilities. SIP
extensions, documented in standards track RFCs, may define
additional methods.
Request-URI: The Request-URI is a SIP or SIPS URI as described in
Section 19.1 or a general URI (RFC 2396 [5]). It indicates
the user or service to which this request is being addressed.
The Request-URI MUST NOT contain unescaped spaces or control
characters and MUST NOT be enclosed in "<>".
SIP elements MAY support Request-URIs with schemes other than
"sip" and "sips", for example the "tel" URI scheme of RFC
2806 [9]. SIP elements MAY translate non-SIP URIs using any
mechanism at their disposal, resulting in SIP URI, SIPS URI,
or some other scheme.
SIP-Version: Both request and response messages include the
version of SIP in use, and follow [H3.1] (with HTTP replaced
by SIP, and HTTP/1.1 replaced by SIP/2.0) regarding version
ordering, compliance requirements, and upgrading of version
numbers. To be compliant with this specification,
applications sending SIP messages MUST include a SIP-Version
of "SIP/2.0". The SIP-Version string is case-insensitive,
but implementations MUST send upper-case.
Unlike HTTP/1.1, SIP treats the version number as a literal
string. In practice, this should make no difference.7.2 Responses
SIP responses are distinguished from requests by having a Status-Line
as their start-line. A Status-Line consists of the protocol version
followed by a numeric Status-Code and its associated textual phrase,
with each element separated by a single SP character.
No CR or LF is allowed except in the final CRLF sequence.
Status-Line = SIP-Version SP Status-Code SP Reason-Phrase CRLF
The Status-Code is a 3-digit integer result code that indicates the
outcome of an attempt to understand and satisfy a request. The
Reason-Phrase is intended to give a short textual description of the
Status-Code. The Status-Code is intended for use by automata,
whereas the Reason-Phrase is intended for the human user. A client
is not required to examine or display the Reason-Phrase.
While this specification suggests specific wording for the reason
phrase, implementations MAY choose other text, for example, in the
language indicated in the Accept-Language header field of the
request.
The first digit of the Status-Code defines the class of response.
The last two digits do not have any categorization role. For this
reason, any response with a status code between 100 and 199 is
referred to as a "1xx response", any response with a status code
between 200 and 299 as a "2xx response", and so on. SIP/2.0 allows
six values for the first digit:
1xx: Provisional -- request received, continuing to process the
request;
2xx: Success -- the action was successfully received, understood,
and accepted;
3xx: Redirection -- further action needs to be taken in order to
complete the request;
4xx: Client Error -- the request contains bad syntax or cannot be
fulfilled at this server;
5xx: Server Error -- the server failed to fulfill an apparently
valid request;
6xx: Global Failure -- the request cannot be fulfilled at any
server.
21 Response Codes ...................................... 182
21.1 Provisional 1xx ..................................... 182
21.1.1 100 Trying .......................................... 183
21.1.2 180 Ringing ......................................... 183
21.1.3 181 Call Is Being Forwarded ......................... 183
21.1.4 182 Queued .......................................... 183
21.1.5 183 Session Progress ................................ 183
21.2 Successful 2xx ...................................... 183
21.2.1 200 OK .............................................. 183
21.3 Redirection 3xx ..................................... 184
21.3.1 300 Multiple Choices ................................ 184
21.3.2 301 Moved Permanently ............................... 184
21.3.3 302 Moved Temporarily ............................... 184
21.3.4 305 Use Proxy ....................................... 185
21.3.5 380 Alternative Service ............................. 185
21.4 Request Failure 4xx ................................. 185
21.4.1 400 Bad Request ..................................... 185
21.4.2 401 Unauthorized .................................... 185
21.4.3 402 Payment Required ................................ 186
21.4.4 403 Forbidden ....................................... 186
21.4.5 404 Not Found ....................................... 186
21.4.6 405 Method Not Allowed .............................. 186
21.4.7 406 Not Acceptable .................................. 186
21.4.8 407 Proxy Authentication Required ................... 186
21.4.9 408 Request Timeout ................................. 186
21.4.10 410 Gone ............................................ 187
21.4.11 413 Request Entity Too Large ........................ 187
21.4.12 414 Request-URI Too Long ............................ 187
21.4.13 415 Unsupported Media Type .......................... 187
21.4.14 416 Unsupported URI Scheme .......................... 187
21.4.15 420 Bad Extension ................................... 187
21.4.16 421 Extension Required .............................. 188
21.4.17 423 Interval Too Brief .............................. 188
21.4.18 480 Temporarily Unavailable ......................... 188
21.4.19 481 Call/Transaction Does Not Exist ................. 188
21.4.20 482 Loop Detected ................................... 188
21.4.21 483 Too Many Hops ................................... 189
21.4.22 484 Address Incomplete .............................. 189
21.4.23 485 Ambiguous ....................................... 189
21.4.24 486 Busy Here ....................................... 189
21.4.25 487 Request Terminated .............................. 190
21.4.26 488 Not Acceptable Here ............................. 190
21.4.27 491 Request Pending ................................. 190
21.4.28 493 Undecipherable .................................. 190
21.5 Server Failure 5xx .................................. 190
21.5.1 500 Server Internal Error ........................... 190
21.5.2 501 Not Implemented ................................. 191
21.5.3 502 Bad Gateway ..................................... 191
21.5.4 503 Service Unavailable ............................. 191
21.5.5 504 Server Time-out ................................. 191
21.5.6 505 Version Not Supported ........................... 192
21.5.7 513 Message Too Large ............................... 192
21.6 Global Failures 6xx ................................. 192
21.6.1 600 Busy Everywhere ................................. 192
21.6.2 603 Decline ......................................... 192
21.6.3 604 Does Not Exist Anywhere ......................... 192
21.6.4 606 Not Acceptable .................................. 192
1 comment:
Generally I don't read article on blogs, however I would like to say that this write-up very pressured me to check out and do so! Your writing style has been amazed me. Thanks, quite great article.
Post a Comment